Welding with Jackery Solar Generator 2000 Plus

The power of electric welding machines is relatively large, usually between 1000-8000 watts.

However, the specific power depends on factors such as the type and thickness of the material you are welding on.

Therefore, before you consider using a solar generator to connect to your welding machine, you need to know the power required by the welding machine you are using.

Suppose you ensure that the power of the welding machine and the solar generator are matched and use the correct connection method.

In that case, using the welding machine and the solar generator outdoors is entirely feasible.

The main content of this video is that Jackery Solar Generator 2000 Plus provides power support for welding.

First, a man gave a detailed introduction to the Jackery Solar Generator 2000 Plus, including its product model, battery capacity, output power, etc.

Then, the man connected the welding machine to the Explorer 2000 Plus and performed a long-lasting welding operation.

The Explorer 2000 Plus and SolarSaga solar panels were then shelved by the man in the yard for solar charging.

Finally, the man used the Explorer 2000 Plus to power a light show in the house.

A Jackery Explorer 2000 Plus portable power station can support five more batteries simultaneously, increasing the capacity from 2 kWh to 12 kWh.

The Jackery Solar Generator 2000 Plus can power up to 99% of your home appliances, can provide up to 6000W of power to heavy equipment, and can power up to 18.